Products

Product description Dye-free and fragrance-free, alcoholic solution for hygienic and surgical hand disinfection. Product data Contains 100 g of solution Active ingredients: 1. ETHANOL 15.8 g / L 2. ISOPROPYL ALCOHOL 55 g / L effect Levirucide fungicide Bactericidal Limited virucidal + Chemical-physical data Density approx. 0.83 g / cm3 / 20 ° C Colorless Flash point 16 ° C Liquid form application areas Hygienic hand disinfection: rub 3 ml into dry hands for 30 seconds. Surgical hand disinfection: Rub a sufficient amount of UNISEPT into the hands and forearms for 180 seconds. Instructions for use Use UNISEPT undiluted. During the exposure time for the hygienic and surgical For hand disinfection, the portioning should be done in such a way that the hands remain well moistened during the entire application time. special instructions Use externally only. Do not get in eyes. In the event of accidental eye contact, rinse immediately with plenty of water for several minutes with the eyelid held wide open. Flammable! Do not bring into contact with open flames or switched on heat sources. Once opened, do not use the container more than 12 months after the expiry date.

Clean Gate is a disinfection and sanitisation walk-through cabin for the sanitisation of objects and people in conjunction with suitably installed water based atomised biocides and/or virucide sprays delivered under pressure through multi-nozzles. This helps to reduce or eliminate the number and species of bacteria, viruses, and parasites apparent on lifeless surfaces which can enter the human body via the eyes, nose and mouth by touching these surfaces causing severe infections. The COVID-19 virus, which is present today on all continents and causes serious health problems, is a prime example. Clean Gate system is triggered via non-contact sensors automatically. Disinfectant in the tank is transmitted to the sprayer nozzles via mid pressure motor rated up to 36 bar. A non-contact thermometer is fitted to the front of the cabin which displays the temperature of person entering the cabin. Clean Gate System can be integrated into PACS software (personnel attendance control system) and thus personnel-based fever information can be recorded. A red warning light shows up on the screen will alert operatives if a temperature of over 98.6F / 38C is detected. Easy to install and use Easy portability Medium pressure fogging method Maximum surface access Temperature measuring Light Control Warning System Special coated metal body Electrical installation in accordance with IP65 protection class Mask detection mode PACS integration

Check that the plug of the device is not plugged into the electrical socket. (Remove it if installed.) Open the tank cover to fill the medicine tank. Fill the tank with disinfectant formulation. Be careful not to mix different medicines. After filling the tank, close the tank cap. (Do not add more than 5lt.) Spraying gonna start as the on-off switch pressed. The extension cable should be at least 3 x 2.5 TTR grounded cable. Turn off the switch of the device after the application is completed. Let the product rest for at least 5 minutes in 1 hour of use. Note: If the device is not used in accordance with the “OPERATING INSTRUCTIONS”, it will be out of WARRANTY. INFORMATION ABOUT IMPROPER USE Particular attention should be paid to the operation and shutdown of the device as in the instructions for use. City Halls Military Buildings Local Authorities Farming Areas Greenhouses Printing Centers Hotels USAGE AREAS Schools Hospitals Food Production Centers Factories and Depots Trains Planes All Mass transportation vehicles Pay attention to all warnings indicated on the label about the formulation used. Avoid contact from parts of equipment that come into contact with formulations, especially without thorougly cleaning with water. All personnel exposed to aerosol must wear a suitable respirator and other protective clothing. Do not spray formulations containing solvents that damage plastic (e.g methylene chloride). Do not spray near an open flame. Never leave the device unattended and maker sure that as much moisture-free air as possible enters the engine. SAFETY WARNINGS OPERATING INSTRUCTIONS ULTRA LOW VOLUME SPRAYER - USER’S MANUAL CLEANFOG INPUT POWER : 220V 1600W 50Hz TANK CAPACITY : 4 lt LIGHTWEIGHT : 4 kg FLOW RATE : 110 ml/min PARTICLE SIZE : 9-49 micron EFFECTIVE RANGE : 4-5 meters MATERIAL : Full Metal Body TECHNICAL SPECIFICATIONS ULTRA LOW VOLUME SPRAYER - USER’S MANUAL CLEANFOG-FOGPLUS

Disposable/Reusable: Disposable Raw Material: %60 Polypropylene (PP)+ %40 Polyethylene(PE) Laminated Material: 55gr/m2 (GSM) Features: Fully Protective, Air Permeability, Liquid Proof Zipper Type: Invisible and Taped Zipper Zipper Lenght: From waist to neck Hood: Elastic Hood Colour: White and Laminated Sleeve Features: Long Sleeve, Elastic Cuff Parcel Size: 60x40x40 Number of Products/Items in a Parcel: 50 Parcel Weight: 12 kg Sizes: S, M, L, XL, XXL, XXXL Daily Production Capacity: 100.000 Quality Standards/Certificates: EC Declaration of Conformity FDA EN 13795-1:2019 ISO 9001:2015 ISO 13485:2016 Regulation 2016/425 UNIVERSAL CERTIFICATE UNIVERSAL TEST REPORT EUROLAB TEST REPORT Type 5/6 Coverall